IRC, freenode, #hurdfr, 2010-09-20

<youpi> tu peux compiler ton gnumach pour qu'il utilise la console série, et tu
  mets le port série sur la console qemu
<youpi> -AC_DEFINE([RCLINE], [-1], [com port for the remote console])
<youpi> +AC_DEFINE([RCLINE], [0], [com port for the remote console])
<youpi> dans i386/configfrag.ac
<manuel> grumpf, peu pratique :)
<youpi> ben après t'auras accès vraiment à ton gnumach
<youpi> messages de noyau etc.
<manuel> oui c'est sûr, mais j'ai aucune idée de comment je configure qemu &
  co, ça va être sportif encore
<youpi> -serial vc
<manuel> je lance pas moi-même le qemu, donc j'imagine qqch comme -serial
  tcp::qqch,server
<youpi> ben t'as pas accès à la console alors ?
<youpi> mais sinon via tcp ça devrait aller oui
<manuel> si, via telnet
<manuel> youpi: et après, tu fais comment pour envoyer le c-a-D toi ?
<manuel> (question sans doute bête)
<youpi> c'est un code différent via com1 iirc
<manuel> mmmmmmmmmhhhhhh
<youpi> (c'est pas bête: c-a-d c'est pas vraiment défini pour un port série)
<manuel> tu sais où je peux le trouver ?
<youpi> ah tiens non yena pas
<youpi> mais bon spa dur à ajouter
<manuel> bcp trop compliqué pour moi
<youpi> dans i386/i386at/com.c, à la première ligne ttyinput()
<youpi> tu compares c à ce que tu veux
<youpi> et dans ce cas tu appelles kdb_kintr
<youpi> (sans paramètre)
<youpi> mais sinon ya pas vraiment besoin d'appeller explicitement le
  débuggueur hein
<manuel> ah ?
<youpi> dès que tu mets debug_all_traps à 1 dans traps.c, il sera invoqué lors
  du segv
<manuel> ok
<youpi> pour xen j'ai mis £ comme raccourcis
<manuel> ça me paraît plus simple dans ce cas
<youpi> clin d'œil à la société anglaise :)

IRC, freenode, #hurd, 2014-02-20

<gg0> 04:06:45< gg0> ok a configuration that works w/o patching anything is
  9600 7S1 [ 7bits - parity Space - 1 stopbit ]
<gg0> 04:07:57< gg0> it displays correctly gnumach, ext2fs and following
  outputs
<gg0> 04:28:05< gg0> youpi: instead if you want a patch, this one makes
  gnumach default to 8N1. someone should still implement serial line
  settings for ext2fs though
<gg0> seems something broke it later
<gg0> or it never worked on real hardware
<braunr> we definitely want it to work with 8N1
<gg0> never had problems with _virtual_ serial consoles
<gg0> never = during last 2 years = since
  http://git.savannah.gnu.org/gitweb/?p=hurd/gnumach.git;a=commitdiff;h=2a603e88f86bee88e013c2451eacf076fbcaed81
<gg0> but i don't think i was on real hardware at that time

IRC, freenode, #hurd, 2014-02-21

<gg0> yeah, i have one rebuilt trying to fix serial console (already give
  up)
<teythoon> what were you trying to fix ?
<gg0> i didn't fix anything but it's been useful somehow :)
<gg0> this one http://paste.debian.net/plain/83292
<gg0> initial messages from mach/hurd outputs like there was no line feed
<gg0> each line overwrites previous one
<gg0> then ext2fs outputs garbage
<gg0> then openrc start outputting fine
<gg0> minicom 9600 8N1
<teythoon> this is from a real machine ?
<gg0> yep real machine
<teythoon> nice :)
<gg0> i fixed last line, last garbage, by switching c: from 38400 to 9600
  in inittab
<teythoon> i've a vt510 terminal connected to my hurd box, and i started to
  make the serial setting in gnumach more configurable
<gg0> and disabling T0
<teythoon> didn't finish it though
<gg0> physical vt510 connected to virtual hurd box?
<teythoon> no, it's a real box as well
<gg0> good. and does it behave as described/pasted above?
<teythoon> currently i do not put the mach console on the serial line
<teythoon> b/c it has a fixed baud rate of 9600
<teythoon> and both grub and the getty are configured at a higher speed
<teythoon> hence my desire to improve gnumachs serial port setup
<gg0> i don't care much about speed. such no-line-feed behavior is quite
  annoying though
<gg0> i thought it was related to CRMOD which afaiu should translate cr to
  cr-lf, but i was surely missing something
<gg0> (annoying till one does ^A-A to make minicom add line feeds itself)