---

19.2.1 Control settings

Control settings:

‘parenb’ ¶

Generate parity bit in output and expect parity bit in input. May be negated.

‘parodd’ ¶

Set odd parity (even if negated). May be negated.

‘cmspar’ ¶

Use "stick" (mark/space) parity. If parodd is set, the parity bit is always 1; if parodd is not set, the parity bit is always zero. Non-POSIX. May be negated.

‘cs5’ ¶

‘cs6’

‘cs7’

‘cs8’

Set character size to 5, 6, 7, or 8 bits.

‘hup’ ¶

‘hupcl’

Send a hangup signal when the last process closes the tty. May be negated.

‘cstopb’ ¶

Use two stop bits per character (one if negated). May be negated.

‘cread’ ¶

Allow input to be received. May be negated.

‘clocal’ ¶

Disable modem control signals. May be negated.

‘crtscts’ ¶

Enable RTS/CTS flow control. Non-POSIX. May be negated.

‘cdtrdsr’ ¶

Enable DTR/DSR flow control. Non-POSIX. May be negated.